Setting The Brightness; Resetting - Denon AVR-4806CI Operating Instructions Manual

Advanced Operation
SYSTEM CALL
CHANNEL

Setting the brightness

• The brightness of the display can be adjusted in 5 levels.
• The default brightness setting is level 3 (level 5 = brightest).
1
Press and hold the
least three seconds.
• The IR segment blinks twice.
2
For 1 brightness step increase:
CHANNEL +
Press the
-1
2
For 1 brightness step increase:
CHANNEL –
Press the
-2
3
Press and hold the
programming.
• The IR segment twice as confirmation.
IR segment
MODE SELECTOR
NUMBER
RC SETUP
RC SETUP
button for at
button.
button.
RC SETUP
button to exit

Resetting

¢ Resetting the single learned button
1
Press and hold the
least three seconds.
• The IR segment blinks twice.
2
9 7 6
, ,
Press the
• The IR segment blinks twice.
3
MODE SELECTOR
Press the
4
Press the learned button you want to reset
twice.
• The IR segment blinks twice.
Other key can be deleted by repeating steps 1 to 4.
¢ Resetting the learned buttons
1
Press and hold the
least three seconds.
• The IR segment blinks twice.
2
9 7 6
, ,
Press the
• The IR segment blinks twice.
3
MODE SELECTOR
Press the
reset twice.
• The IR segment blinks twice.
¢ Resetting the system call buttons
1
Press and hold the
least three seconds.
• The IR segment blinks twice.
2
9 7 8
Press the , ,
• The IR segment blinks twice.
3
SYSTEM CALL
Press the
want to reset.
4
Press and hold the
least three seconds to clear the system call.
• The IR segment blinks twice.
88
RC SETUP
button for at
button (9 → 7 → 6).
button.
RC SETUP
button for at
button (9 → 7 → 6).
button you want to
RC SETUP
button for at
button (9 → 7 → 8).
button (1 to 3) you
RC SETUP
button for at