Basic Operation; Playback; Operating The Remote Control Unit - Denon AVR-4806CI Operating Instructions Manual

Basic Operation

Playback

Operating the remote control unit

• The RC-1036 remote control has a backlit EL display whose
contents change according to the mode or function selected,
with the appropriate remote commands for that mode or
function.
¢ Operate the this unit
AMP
The button is the main mode for controlling
the AVR-4806CI in the main room (MAIN ZONE).
The function switches as shown below each time one of
the AMP button is pressed.
AMP ZONE 2
SYSTEM CALL
∗
:This mode can not be used with the AVR-4806CI.
The EL display switches as shown below with respect to
the selected mode.
¢ AMP mode
To operate the MAIN ZONE function.
ZONE 3
ZONE 4
43
¢ ZONE2 mode
To operate the ZONE2 function.
SURROUND MODE buttons can not be used with the AVR-
4806CI.
¢ ZONE3 mode
To operate the ZONE3 function.
¢ SYSTEM CALL mode
To operate the "System call" function.
• This function provides the ability to program a series of
individual remote control codes into a macro stored under
one of the number pad's numeric choices (
85).
page 80 ~