Preset Name - Denon AVR-4806CI Operating Instructions Manual

4
Repeat step 3 to input the preset channel
name.
To reset the input source name to the default value,
press the CURSOR F F or G G button to highlight the input
source display, then press the CURSOR H H button
When "Default Yes" is selected, then press the
CURSOR F F button to reset to the default name.
5
Once all the characters have been input, press
ENTER
the button.
• The "Preset Name" screen reappears.
Use the same procedure to change other input station
names as well.
6
CURSOR
When the
very bottom of the screen.
• The screen for the next preset memory block
appears.
It is also possible to select the desired preset memory
block by selecting "Block" then pressing the CURSOR
F F or G G button.
7
ENTER
Press the button.
• Return to the "Tuner Presets" screen.
8
ENTER
Press the button to enter the setting.
• The "Audio Input Setup" menu reappears.
.
H H button is pressed at the
9
CURSOR
Press the
"Exit", then press the
• The "System Setup Menu" reappears.
105
Advanced Setup – Part 1
D D or H H button to select
ENTER
button.