Manual Tuning; Preset Memory - Denon AVR-4806CI Operating Instructions Manual

Basic Operation
FUNCTION
TUNING
PRESET

Manual tuning

1 Set the input source to "TUNER".
(Main unit)
2
TU
Press the
button to select the TUNER
mode.
3
Watching the display, press the
to select the desired band (AM, FM or XM).
When listening to the XM satellite Radio (
71).
4
MODE
Press the button to set the manual tuning
mode.
Check that the display's "AUTO" indicator turns off.
5
TUNING
Press the
station.
The frequency changes continuously when the button
is held in.
• When the manual tuning mode is set, FM stereo broadcasts
are received in monaural and the "STEREO" indicator turns
off.
(Remote control unit
in the AMP mode)
(TUNER)
(Remote control unit)
BAND
button
page
button to tune in the desired
TU
MEMORY
BLOCK
BAND
MODE
RDS SEARCH
CHANNEL
NUMBER
SHIFT

Preset memory

1
Use the "Auto tuning" or "Manual tuning"
operation to tune in the station to be preset in
the memory.
2
TU
Press the
button to select the TUNER
mode.
3
MEMORY
Press the
4
MEMORY BLOCK
Press the
The memory block can also be selected by pressing
the SHIFT button.
5
CHANNEL
Press the
8
) button to select the desired preset channel.
6
MEMORY
Press the
• Store the station in the preset memory.
• To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
66
TUNING
MEMORY
ON SCREEN
TUNER
(TUNER)
(Remote control unit)
button.
A G
( to ) button.
NUMBER 1
button or (
button again.
to