Setting The On Screen Display (Osd) - Denon AVR-4806CI Operating Instructions Manual

Advanced Setup – Part 1

Setting the On Screen Display (OSD)

• Use this to turn the on screen display (messages other than
the menu screens) on or off.
• Sets the on screen display's display mode.
1
CURSOR
Press the
Screen Display" at the "Video Setup" menu,
ENTER
then press the
• Display the "On Screen Display" screen.
2
CURSOR
Press the
item to be set, then press the
button to select the parameter.
Function/Mode Status:
Set whether or not to turn on the on screen display
of the input source name and input mode when an
input source is selected.
Master Volume Status:
Set whether or not to turn on the on screen display
of the main volume level when the main volume is
operated.
Display Mode:
• Mode 1:
Flickering is not prevented.
• Mode 2:
Prevents flickering of the on screen display when
there is no video signal.
Use this mode if the on screen display does not
appear in the Mode 1, as may happen according to
the TV being used.
3
ENTER
Press the button to enter the setting.
• The "Video Setup" menu reappears.
D D or H H button to select "On
button.
D D or H H button to select the
CURSOR F F or G G
4
CURSOR
Press the
"Exit", then press the
• The "System Setup Menu" reappears.
110
D D or H H button to select
ENTER
button.