Setting The Dolby Digital Setup; Setting The Auto Surround Mode - Denon AVR-4806CI Operating Instructions Manual

Advanced Setup – Part 1

Setting the Dolby Digital Setup

• Sets the down-mixing method when not using a center
speaker or surround speakers.
1
CURSOR
Press the
"Dolby Digital Setup" at the "Advanced
Playback" menu, then press the
• Display the "Dolby Digital Setup" screen.
2
CURSOR
Press the
"ON" if you want to use the Compression,
"OFF" if you do not want to use it.
ON:
The dynamic range is compressed automatically
according to the combination of speakers being
used.
OFF:
The dynamic range is not compressed.
Set "Compression" to "ON" if it seems that sound is
distorted because the input level exceeds the
allowable input for the front speakers.
When a center speaker or surround speakers are not
connected, the sounds in those channels are directed
to the front speakers.
3
ENTER
Press the button to enter the setting.
• The "Advanced Playback" menu reappears.
D D or H H button to select
ENTER
button.
F F or G G button to select

Setting the Auto Surround Mode

• The surround mode used at last for the four types of input
signals shown below is stored in the memory, and the signal
is automatically played with that surround mode the next
time it is input.
Note that the surround mode setting is also stored
separately for the different input sources.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals of Dolby Digital, DTS or other multi-
channel format (DOLBY PL
e Multi-channel signals of Dolby Digital, DTS or other
multi-channel format (DOLBY/DTS SURROUND)
r PCM and DSD multi-channel signals other than Dolby
Digital and DTS (MULTI CH IN)
Default settings are indicated in ( ).
During playback in the PURE DIRECT mode, the
surround mode does not change even if the input signal
is changed.
1
CURSOR
Press the
"Auto Surround Mode" at the "Advanced
Playback" menu, then press the
• Display the "Auto Surround Mode" screen.
2
CURSOR
Press the
"ON" if you want to use the auto surround
mode, "OFF" if you do not want to use it.
3
ENTER
Press the
• The "Advanced Playback" menu reappears.
• The various settings applied in the auto surround mode can
be checked via the on screen display. Simply press the ON
SCREEN button (
112
II x cinema)
D D or H H button to select
ENTER
F F or G G button to select
button to enter the setting.
page 51, 52).
button.