Connecting An External Control Device; Playback (Basic Operation); Important Information - Denon AVR-1911 Owner's Manual

ENGLISH
Connecting an external control
device
REMOTE CONTROL jacks
If this unit is installed in a location that is out of range of the signal
from the remote control unit, you can still operate the unit and the
devices connected to it by using a commercially available IR receiver.
You can also use it to remotely control ZONE2 (another room).
Infrared
Infrared
retransmitter
sensor
Output
Input
20

Playback (Basic operation)

n Selecting the input source (vpage 20)
n Adjusting the master volume (vpage 21)
n Turning off the sound temporarily (vpage 21)
n Playing a Blu-ray Disc player/DVD player
(vpage 21)
n Playing a CD player (vpage 21)
Device equipped with a
n Playing an iPod ® (vpage 22)
REMOTE CONTROL IN jack
n Tuning in radio stations (vpage 25)
n Playing a USB memory device (vpage 27)
Selecting a listening mode (Surround mode)
(vpage 28)
Playback (Advanced operation) (vpage 36)

Important information

Before starting playback, make the connections between the different
components and the settings on the receiver.
NOTE
Also refer to the operating instructions of the connected components
when playing them.
Selecting the input source
3UHVV WKH LQSXW VRXUFH VHOHFW EXWWRQ
NET/USB

DOCK SAT/CBL
WR EH SOD\HG EDFN
TV
The desired input source can be selected
directly.
iPod PLAY
• When
source of this unit is switched to "DOCK"
or "USB/iPod" and the connected iPod is
automatically played (vpage 25 "iPod play
function").
You can also use the following operation to select an input
source.
    
iPod DVD BD TUNER
   
GAME V.AUX CD
is pressed, the input
n Using the "Source Select" menu
q
SOURCE SELECT
Press .
Display the "Source Select" menu.
Source Select
HD Radio SAT/CBL
CD GAME
BD V.AUX
DVD DOCK
TV
The currently selected input source
is highlighted.
[ ]:Source
[ENT]:Select
w uio p
Use to select the input source,
ENTER
then press .
The input source is set and the source
selection menu is turned off.
• When using with an iPod connected directly to the USB port of this
unit, select "USB/iPod" for the input source.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at "Source Delete" (vpage 59).
• To turn off the source selection menu without selecting an input
source, press SOURCE SELECT again.
n Using the knob on the main unit
SOURCE SELECT
Turn .
SOURCE SELECT
• Turning switches
the input source, as shown below.
BD DVD TV SAT/CBL
CD HD Radio USB/iPod
GAME
DOCK V.AUX