Table of Contents
Advertisement
Create the ICP contour "Form roll"
Contour element 5 (horizontal line)
Press the Line menu key
Describe the contour element:
Target point Z in Z: –45 mm
Length of line L: No entry
Special feed rate F: No entry
Conclude entry:
Press the Save soft key
Contour element 6 (oblique cut)
Press the Line menu key
Describe the contour element:
Target point X in X: 60 mm
Target point Z in Z: –49 mm
Angle A to Z axis: No entry
Length of line L: No entry
Special feed rate F: No entry
Conclude entry:
Press the Save soft key
HEIDENHAIN MANUALplus 4110 Recess Machining Example
9.15
- Quick Links:
- Axis Directions
Hide quick links:
Advertisement
Table of Contents
