Create The Icp Contour “Form Roll” - HEIDENHAIN MANUALPLUS 4110 Manual

Create the ICP contour "Form roll"
Superimpose roundings

Press the Superimpose
form elements soft key
(Position for superimposing
is shown with a red square)

Press the Rounding menu
key
Describe the contour element:

Rounding radius B: 1.5 mm

Special feed rate F: No entry

Insert rounding:
Press the Save soft key
(Next position for
superimposing is shown)
HEIDENHAIN MANUALplus 4110 Recess Machining Example 9.17