Machine Setup - HEIDENHAIN MANUALPLUS 4110 Manual

Entering the machine data

Machine setup

The following functions are necessary for setting up the lathe:
Activating a tool
Entering technology data (shaft speed / cutting speed, feed rate, maximum speed)
Setting the workpiece zero point
Defining the protection zone
Defining the tool-change point
Prepare the machine

Clamp a workpiece

Clamp tool T1
Entering the machine data

Call the main menu:
Press the Menu key

Select machine-data entry:
Press the Set S, F, and T
menu key
HEIDENHAIN MANUALplus 4110 Machine Setup 6.1