HEIDENHAIN MANUALPLUS 4110 Manual page 116

Create the "Matrix" ICP contour
Contour element 4 (arc)

Switch to arc entry:
Press the Arc soft key

Define the arc with center
and radius:
Press the Arc with Mp + R
menu key
Describe the contour element:

Target point X in X: No entry

Target point Z in Z: No entry

Center point I in X: 0 mm

Center point K in Z: –11.6 mm

Radius R: 7.5 mm

Special feed rate F: No entry

Conclude entry:
Press the Save soft key
(There are two solutions.)

Display next solution:
Press the Next solution
soft key
(desired solution)

Press the Select solution
soft key
HEIDENHAIN MANUALplus 4110 Surface Machining Example 8.14