Tool Display Element; One Tool Holder (Two-Digit T Display); Turret Or Automatic Tool Changer (Four-Digit T Display) - HEIDENHAIN MANUALPLUS 4110 Manual

Machine data display
Tool display

Tool display element:

Identification letter: T
Depending on the tool carrier, either a
2- or 4-digit number follows (without
leading zeros)
Fields dx, dz: Current tool
compensation

One tool holder (two-digit T display)

The T number indicates the position in the tool management.
Example "T1"
T1 from the tool manager is activated.
Example "T28"
T28 from the tool manager is activated.

Turret or automatic tool changer (four-digit T display)

The first two digits: Position in the tool management
The last two digits: Rotated position of the turret
Example "T101":
T1 from the tool manager is activated.
Rotated turret position: 1
Example "T2908":
T29 from the tool manager is
activated.
Rotated turret position: 8
HEIDENHAIN MANUALplus 4110 System Operation 3.5