HEIDENHAIN MANUALPLUS 4110 Manual page 122

Create the "Matrix" ICP contour for finishing machining
"Matrix – finishing contour " ICP contour
The matrix is finished from the inside towards the outside. For this reason the ICP contour
"Matrix – finishing contour" with the contour direction "from inside to outside" is created.
Copy ICP contour

Call the ICP editor:
Press the Edit ICP soft key

Press the Contour list soft
key

Position the cursor on the "2
– Matrix" ICP contour:
Press the arrow key
Prepare for copying:

Press the Copy soft key

Enter the new ICP contour
number "21" in the to field
Perform copying:

Press the Copy Yes soft key
Change the contour name:

Press the Change text soft
key

Enter the contour name
"Matrix – finishing contour"
HEIDENHAIN MANUALplus 4110 Surface Machining Example 8.20