Contour Element 4 (Horizontal Line) - HEIDENHAIN MANUALPLUS 4110 Manual

Create the ICP contour "Threaded stud"

Conclude entry:
Press the Save soft key

Contour element 4 (horizontal line)

Contour element 4 (horizontal line):

Press the Line menu key
Describe the contour element:

Target point Z in Z: –55 mm

Length of line L: No entry

Special feed rate F: No entry

Conclude entry:
Press the Save soft key
HEIDENHAIN MANUALplus 4110 Linear Machining Example 7.10