1. Manuals
  2. Brands
  3. Marmitek Manuals
  4. Security System
  5. PROGUARD 800 - QUICK
  6. Installation manual

Home Automation Tones; System Trouble Tones - Marmitek PROGUARD 800 Installation Manual

Hide thumbs Also See for PROGUARD 800:
Table of Contents

Advertisement

2.
Select Enabled or Disabled.
To program tones sounded by the built-in siren on arming:
1.
From the Programming menu, select Tones, Arm Tones, Siren [9332].
2.
Select Enabled or Disabled.
8.6.4: Disarming Tones
To program tones sounded by the wireless siren on disarming:
1.
From the Programming menu, select Tones, Disarm Tones, WL Siren [9341].
2.
Select Enabled or Disabled.
To program tones sounded by the built-in siren on disarming:
1.
From the Programming menu, select Tones, Disarm Tones, Siren [9342].
2.
Select Enabled or Disabled.

8.7: Home Automation Tones

Home Automation tones are sounded when you control HA units using keypads or keyfob
transmitters.
To program built-in siren Home Automation tones:
1.
From the Programming menu, select Tones, HA Tones [935].
2.
Select Enabled or Disabled.

8.8: System Trouble Tones

System trouble tones are sounded to provide an audible indication that a system trouble
condition exists. On hearing these tones the user is then able to determine which trouble
condition is present from the LCD keypad on the front panel. For additional information,
see 3.4.2: System Trouble Tones.
8.8.1: Trouble Tones
The Trouble Tones option allows you to enable or disable audible trouble annunciation.
To program the Trouble Tones option:
1.
From the Programming menu, select Tones, Trouble Tones [936].
2.
Select Enabled or Disabled.
8.8.2: Telephone Trouble Tones
Most trouble tones are not sounded between 10:00pm and 7:00am so as not to disturb
the user late at night. Telephone trouble, however, may be an attempt to sabotage the
system by cutting the telephone wires. For this reason, you can program telephone
trouble tones to sound at all times.
To program the Telephone Trouble Tones option:
1.
From the Programming menu, select Tones, Tel. Trb. Tones [937].
2.
Select Immediate or Delayed.
8.8.3: Fire Trouble Tones
The Fire Trouble Tones option is a feature designed to repeat fire-related trouble tones
until the problem has been taken care of. If this feature is enabled, fire trouble tones shall
be repeated 3½ hours after the user has manually silenced the tones if the trouble
condition has not been restored.
ProGuard800™
-55-
Show Quick Links

Hide quick links:

Advertisement

Table of Contents
loading

Related Manuals for Marmitek PROGUARD 800

Related Content for Marmitek PROGUARD 800

This manual is also suitable for:

Proguard 800 series

Table of Contents