Controlling Lights And Appliances (Home Automation) - Marmitek PROTECTOR 28 Installation And Operating Manual

6.8 CONTROLLING LIGHTS AND
APPLIANCES
6.8.1. AVAILABLE HOME AUTOMATION
FUNCTIONS
1. ALARM LIGHT
This Home
Automation module
will be switched on
during the arm delay of the security system.
As soon as the system arms, the module is
switched off. This module can also be
controlled by pressing the Light On – Light Off
keys of the KR21 Key Fob Remote. Now there
is no need to arrive home in the dark
anymore, or leave on lights in the house when
you are going away.
MARMITEK X-10
MODULE SET TO A1
PROTECTOR28
Your security system is equipped with a wide variety of functions to control lights, extra sirens, appliances and sunshades,
throughout the house. Some sets have a Lamp Module LM12, for controlling lights, as a standard item. More modules are
available separately, to expand your system. Beside lamp modules, in-wall dimmer and distribution panel dimmers (DIN-Rail
dimmers) are available.
There's a major difference between lamp and appliance modules. The LM12 is a lamp module. Besides switching, this
module can also dim lights. Modules that cannot dim are called appliance modules. Electrical loads or all kinds can be
connected to such a module (heater, pond pump, coffee machine, washing machine, etc.). When an alarm situation occurs,
all lamps connected to lamp modules (LM12 Lamp Module, LW10 In-Wall Dimmer and LD10 DIN-Rail Dimmer) will switch on
and off continuously (flashing). Appliance modules will be switched off. You can get more information about expanding
your system from your dealer or at our website: www.marmitek.com.
(REFERENCE ADDRESS SC2800 = A1 (FACTORY DEFAULT). REFER TO 6.8.2 FOR MORE INFORMATION)
having the same House Code as the base
station (in our example with base address A1,
all lamp modules with House Code A) will be
switched on and off (flashing) during the
alarm time of 4 minutes. All appliance
modules with House Code A will be switched
off.
MODULE SET TO A
2. ALL LIGHTS
ON/OFF
During an alarm, all
lamp modules
MARMITEK X-10
3. STATUS
INDICATION
This Home
Automation module
will be switched on as soon as you arm the
system. The module will be switched of as
soon as the system is disarmed. Gives you the
status of your security system being in armed
or disarmed mode.
MARMITEK X-10
MODULE SET TO A2
27