Vocal Message Annunciation - Marmitek PROGUARD 800 Installation Manual

This...
DISARMED
FULL ARMED
PART ARMED
PERIMETER ARMED
FULL ARMING
PART ARMING
PERIMETER ARMING
PART ARMED INST
PERIM ARMED INST
PART ARMING INST
PERI ARMING INST
Table 3.4: Armed Status
This...
ZONES IN ALARM
TAMPER ALARM
56 TO EXIT
11 TO DISARM
SYSTEM NOT READY
KEYPAD LOCKED
SYSTEM TROUBLE
Table 3.5: System Status
3.4.2: System Trouble Tones
In the event of system trouble, the ProGuard800 sounds a series of tones to alert the user.
To silence these tones, press  and scroll through the system trouble list displayed on the
LCD. When the trouble condition is restored, it is removed from the system trouble list.
1
For this feature to function, Trouble Tones must be enabled in programming
– see 8.8.1: Trouble Tones.
System trouble tones are not sounded from 10:00pm to 7:00am so as not to disturb
household members who may be asleep. However, you can program the system to
immediately annunciate telephone trouble at all times – see 8.8.2: Telephone Trouble Tones.

3.5: Vocal Message Annunciation

Certain versions of the ProGuard800 hardware, support vocal annunciation of system
status. If this feature is enabled in programming (see 9.13: Vocal Messages), the system
plays short messages to indicate arming, disarming, bypassed zones, system trouble,
water alarm and message waiting.
1
The availability of the Vocal Message annunciation feature is hardware dependent.
ProGuard800™
Means...
The system is disarmed.
The system has been armed using the displayed arming method.
The system is in the process of arming (displayed during exit delay).
The system has been armed using the displayed arming method with
the Instant arm feature activated.
The system is in the process of arming with the Instant arm feature
activated.
Means...
Zones have been violated.
The system has been tampered with.
The exit delay is counting down (56 seconds remaining).
The entry delay is counting down (11 seconds remaining).
The system is not ready to arm, check that all doors and windows
are closed.
Five unsuccessful attempts were made to enter a user code, the
keypad is locked for 30 minutes.
A trouble condition has been detected, press  for further details.
-21-