Hk855 Hardwire Lcd Keypad - Marmitek PROGUARD 800 Installation Manual

3.6: HK855 Hardwire LCD Keypad

In addition to the front panel keypad, you can install up to three, individually addressed,
HK855 Hardwire LCD Keypads (or two keypads with large LCD). The layout of the
HK855 Hardwire LCD Keypad is similar to the front panel keypad and most of the
functionality is identical. The following diagram shows the layout of the HK855 Keypad.
LCD
Display
Alphanumeric
Keypad
Menu
Navigation
Keys
As with the front panel keypad, the HK855 Hardwire LCD Keypad also provides a
number of special functions that are listed in the following table.
Key Special function
1 Used to enter symbols in descriptor editing.
0 Used to enter symbols in descriptor editing.
2
Used to cancel the current selection.
Used to return to the previous menu level.
3
Used to enter Menu mode.
Used to select the current menu item.
Used to signify the end of an entered value.
Toggles status in Zone Bypass/Unbypass function.
FULL Used to arm the system fully.
In descriptor editing, used to insert a space before the current character.
In phone number editing, used to enter "T", ",", "P", "+", "*", "#".
In account number editing, used to enter Hexadecimal digits (A-F).
Toggles item descriptors and default names.
In the event log, toggles the time/date stamp.
Toggles AM and PM when setting the time in 12hr format.
PART Used to arm the system partially (Part or Perimeter).
In descriptor and phone number editing, used to delete the current character.

Used to scroll backwards in the current menu level.
Used to access the Global Chime shortcut ( + ).

Used to scroll forwards in the current menu level.
During standby, used to scroll through the list of system trouble conditions.
Table 3.6: HK855 Hardwire LCD Keypad Special Functions
-22-
Figure 3.3: HK855 Hardwire LCD Keypad (PROGUARD800-KPD/S)
System
Status
LEDs
Menu
Navigation
Keys
Arming
Keys
© MARMITEK