System Monitoring; Home Automation; Self-Monitoring; Telecontrol - Marmitek PROGUARD 800 User Manual

1.2: System Monitoring

When an event occurs within the system, the control panel sends a message to your
monitoring service describing the exact nature of the event. This enables the monitoring
service to take the required action. System monitoring can implement either regular
telephone or cellular communication.
A sensor detects.
Remember that no security system can prevent emergencies. This system is only
intended to alert you in case of an emergency and should not take the place of prudent
security practices or life and property insurance.

1.3: Home Automation

An optional expansion module can provide you with the ability to control up to 16
individual electrical appliances or lights using the front panel keypad, wireless keypads or
keyfobs. Additionally, each appliance can be programmed to be turned on and off
automatically according to various schedules and system status conditions.

1.4: Self-Monitoring

In addition to the ability to report to a monitoring service, the system can also send you
and other users notification when an event occurs. This may be in the form of vocal
messages played over the telephone or, if your system supports cellular communication,
you can receive information on system status via SMS. If an alarm occurs on the
premises, you are informed no matter where you are in the world.
SMS Control
Using your cellular phone, you can also send commands to the appliances controlled by
the Home Automation feature using SMS and receive confirmation when the command is
received. (optional expansion module required).

1.5: Telecontrol

The ProGuard800 offers a range of "Telecontrol" features that provide remote access via
the telephone. These features include remote arming/disarming, siren cancel and Two-
Way audio via the control panel's built-in microphone and speaker.
The Two-Way Audio features allow you to contact your home directly in the event of an
alarm or simply to check the premises when you are away.

1.6: Vocal Message Annunciation

Vocal message annunciation is an optional feature that, if enabled in programming,
causes the system to play short messages that indicate system status.
-6-
The control panel is alerted.
An alarm is generated and the
monitoring service is notified.
© MARMITEK