Table of Contents
Advertisement
9.11: "No Motion" Time
The No Motion feature is designed to monitor the activity of disabled or elderly people. If
a sensor defined as "No Motion" (see 7.6.1: Zone Type) has not detected within a pre-
defined period of time, a No Motion event message is sent to the monitoring station.
To program the No Motion time:
1.
From the Programming menu, select System Options, No Motion
[9411].
2.
Select 6 Hours, 12 Hours, 24 Hours, 48 Hours, 72 Hours or Disabled.
9.12: Microphone/Speaker Options
In addition to the built-in microphone and speaker, the ProGuard800 control panel supports
an external microphone/speaker unit called the "ProGuard800 IP850-Interphone". The
Microphone/Speaker option allows you to choose which microphone and speaker are in use.
You can choose one mic./speaker (internal or external) to function exclusively or both may
function simultaneously.
To program the Microphone/Speaker option:
1.
From the Programming menu, select System Options, Mic./Speaker
[9412].
2.
Select Internal, External or Internal & External.
9.13: Vocal Messages
The Vocal Messages option allows you to enable/disable vocal annunciation of system
status. When this feature is enabled, the system plays a short message to announce
events such as arming and disarming.
To program the Vocal Messages option:
1.
From the Programming menu, select System Options, Vocal Message
[9413].
2.
Select Enabled or Disabled.
1
The availability of the Vocal Message annunciation feature is hardware dependent.
9.14: Installer Access
The Installer Access option determines if the Installer code can access the system at all
times or only after the Master code provides authorization with the Enable Programming
command – see 4.7.11: Enable Programming.
To program the Installer Access option:
1.
From the Programming menu, select System Options, Instal. Access
[9414].
2.
Select Always or User Initiated.
9.15: Auto Log View (for future use)
Auto Log View is a future option that is not available in the current firmware. The default
setting for this option is disabled. Marmitek recommend that you do not change this
setting.
ProGuard800™
-63-
- Quick Links:
- Chapter Two: System Installation
Hide quick links:
Advertisement
Table of Contents
