Table of Contents
Advertisement
6.3.2: SMS Command Format
Each SMS command contains the following elements:
X
SMS Command Descriptor (up to 43 characters of free text)
Y
# (delimiter – separates the descriptor from the actual command)
Z
User Code (4 digits)
[
Command (0=Off, 1=On)
\
Device Number (HA Units: 01-16)
The following example shows the format of an SMS command to switch on a water boiler
controlled by HA unit 8.
B
o
1
While the SMS Command Descriptor is optional, you must start the SMS command with
the # symbol for the system to accept the command.
6.3.3: SMS Confirmation Message Format
After an SMS command is executed, the system can return a confirmation SMS
message to the sender. This message includes the HA unit's descriptor and the
command that was sent. For further information on how to enable this feature, see
10.7.5: SMS Confirmation.
The following example shows the confirmation message the sender receives for the
sample command from the previous section.
6.4: Scheduling
Scheduling allows you to program the panel to send On/Off commands to HA units at
specific times. You can also program the days of the week that the schedule is active.
6.4.1: On Time
To edit an HA unit's "On" Time:
1.
From the main menu, select HA Schedules [8].
2.
Select an HA unit.
3.
From the X-10 unit's sub-menu, select On Time [#1].
4.
Enter a time (HH:MM).
Press 3 when the desired setting is displayed.
5.
ProGuard800™
X
i
l
e
r
B
O
I
Y
O
n
#
1
2
L
E
R
-
O
Z
[
\
3
4
1
0
N
8
-43-
- Quick Links:
- Chapter Two: System Installation
Hide quick links:
Advertisement
Table of Contents
