Chapter Four: Advanced System Operation; Menu Navigation; Stop Communications - Marmitek PROGUARD 800 Installation Manual

Chapter Four: Advanced System Operation

Besides the basic arming functions described in the previous chapter, you can access
additional functions via the menu. This chapter describes these functions and the menu
navigation procedure.

4.1: Menu Navigation

Alphanumeric
Keypad
HA Off Key
HA On Key
Service Call Key
The LCD keypad's friendly, menu-driven interface is designed to facilitate operation and
provide a gentler learning curve for first-time users. You can navigate through the menus
using the arrow navigation keys (/) and make simple yes/no decisions using the
3and 2 keys.
For example, perform the following procedure to navigate to Service, Interface Test.
Press 3 to enter Menu mode.
1.
2. Enter an authorized user code; the first menu item, 1. Stop Comm., is
displayed.
Press  until 7. Service is displayed.
3.
Press 3 to enter the Service menu.
4.
Press  until 5. Interface Test is displayed.
5.
Press 3 to choose the displayed function.
6.
As an alternative to scrolling through menu options, you may enter a function's shortcut
once you have entered Menu mode. Shortcut numbers appear in square brackets in the
procedures throughout this manual.
1
Press the
main menu to exit Menu mode.
4.1.1: Menu Mode Timeout
Menu mode automatically terminates a certain amount of time after the last keystroke.
The duration of this timeout depends upon which code is used to enter the menu. Usually
the Menu Mode Timeout is two minutes but if you enter menu mode using the Installer
code, the timeout is extended to fifteen minutes.

4.2: Stop Communications

To stop communications:
x
From the main menu, select Stop Com. [1]; all communication buffers
are cleared and all pending messages are cancelled.
-28-
Figure 4.1: On-board Keypad Layout
2
key to return to the previous menu level. Press this key when you are in the
Menu
Navigation
Keys
© MARMITEK