Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal product responsibility.
Page 3
The Control Anywhere module gives you the possibility to control all your audio and video equipment with Marmitek remote controls (including the EasyControl 8 (article number 09662) or EasyTouch 35 (article number 09664) or PC Control (09645) anywhere in your home. The remote controls transmit an RF signal to the Control Anywhere module, which then transforms this signal into an IR signal, which is sent to your device.
Page 4
The Marmitek remote controls have two transmitters: an infrared (IR) transmitter and a radio fre- quency (RF) transmitter. You can operate your TV, video etc. with the infrared (IR) technology. The X-10 radio frequency (RF) technology makes it possible to operate lights and appliances from anywhere in your home.
Page 5
1. Insert the plug of the Control Anywhere receiver into the wall socket close to your audio and video equipment. 2. Position the front of the receiver (with the Marmitek logo) towards your device (making sure that the Control Anywhere receiver is no more than 4-6 metres away and in sight of your audio and video equipment).
Page 6
Walk around with your Marmitek remote control until you are out of sight of the device and change the channel. Check this with two people: one person stays with the device to see if the remote control is working and the other person controls the remote.
of the device. Sometimes moving the Control Anywhere can positively affect the range and the effectiveness. Never place the Control Anywhere on top of your device. This can strongly affect the signal range. Note The Control Anywhere is not suitable for use with B&O equipment. 3.
Page 8
Reparaturen erlöschen sämtliche Garantieansprüche. Marmitek übernimmt bei einer falschen Verwendung des Produkts oder einer anderen Verwendung des Produkts als für den vorhergesehenen Zweck keinerlei Produkthaftung. Marmitek übernimmt für Folgeschäden keine andere Haftung als die gesetzliche Produkthaftung. • Schließen Sie den Control Anywhere erst ans Stromnetz an, nachdem Sie sich vergewissert haben, dass die Netzspannung mit dem Wert der auf der Typenbezeichnung angezeigt wird, übereinstimmt.
Page 9
1. Einführung Control Anywhere ermöglicht es Ihnen, um all Ihre Audio- und Videogeräte mit Marmitek Fernbedienungen (worunter auch die Easycontrol 8 (Artikelnummer 09662) oder Easytouch 35 (Artikelnummer 09664) oder PC Control (09645)) wo auch immer im Haus zu bedienen. Die Fernbedienungen senden ein RF Signal zum Control Anywhere Modul, wo es dann in ein IR Signal umgewandelt wird, das zu Ihren Geräten gesendet wird.
Page 10
Radiofrequenz (RF) Sender. Mit der Infrarottechnologie (IR) bedienen Sie Ihren TV, Video usw. Die X-10 Radiofrequenz (RF) Technologie ermöglicht Ihnen Beleuchtung und Geräte fernzubedienen, egal wo im Haus. Mit der Marmitek X-10 Technologie Ihrer Fernbedienung sind zahllose Nutzungsmöglichkeiten denkbar.
Page 11
1. Stecken Sie den Stecker des Control Anywhere Empfängers in eine, sich in der Nähe Ihrer Audio- und Videogeräte befindende Steckdose. 2. Richten Sie die Vorderseite des Empfängers (mit dem Marmitek Logo) auf Ihre Geräte (achten Sie darauf, dass der Abstand des Control Anywhere Empfängers zu Ihren Audio- und Videogeräten höchstens 4 - 6 Meter beträgt und zwischen den Geräten eine Sichtverbindung...
Page 12
3. Ziehen Sie die Teleskopantenne gänzlich aus. 4. Verwenden Sie Ihre Marmitek Fernbedienung zur Steuerung Ihrer Geräte, egal wo im Haus Sie sich befinden. Hinweis Die Entfernung zwischen Ihrer Fernbedienung (verwenden Sie vorzugsweise immer neue Batterien (Alkaline)) und dem Control Anywhere Empfänger kann 10 bis 25 Meter betragen, dies hängt von den örtlichen Gegebenheiten ab.
Page 13
z.B. mit zwei Personen, wobei eine Person in der Nähe der Geräte bleibt um zu sehen ob die Geräte ansprechen und die andere Person die Fernbedienung steuert. Sollte der Videorekorder oder Satellitenempfänger nicht reagieren, so kann es sein, dass die Sender nicht an der richtigen Stelle angebracht wurden.
• Toute utilisation impropre, toute modification ou réparation effectuée vous-même annule la garantie. Marmitek n’accepte aucune responsabilité dans le cas d’une utilisation impropre du produit ou d’une utilisation autre que celle pour laquelle le produit est destiné. Marmitek n’accepte aucune responsabilité pour dommage conséquent, autre que la responsabilité civile •...
Page 16
Le Control Anywhere vous permet de commander tous vos équipements audio et vidéo par l’in- termédiaire de télécommandes Marmitek (y compris la Easycontrol 8 (numéro d’article 09662), la Easytouch 35 (numéro d’article 09664) ou la PC control (09645), partout dans la maison. Les télé- commandes envoient un signal RF au module Control Anywhere qui le convertit ensuite en un signal IR qui est envoyé...
Page 17
Home Control TM13, vous pouvez commander tous vos appareils électriques à l’aide d’une seule télécommande. Les télécommandes Marmitek disposent de deux émetteurs : un émetteur infrarouge (IR) et un émetteur radiofréquence (RF). La technologie infrarouge (IR) vous permet de commander votre téléviseur, magnétoscope, etc.
Page 18
1. Branchez la prise male du récepteur Control Anywhere sur une prise femelle qui se trouve à proximité de vos équipements audio et vidéo. 2. Orientez le devant du récepteur (doté du logo de Marmitek) dans la direction de vos équipements (faites en sorte que le récepteur Control Anywhere ne soit pas éloigné de plus de 4 à...
Page 19
3. Tirez l’antenne télescopique dans sa totalité. 4. Utilisez votre télécommande Marmitek pour l’actionnement de vos équipements, où que vous soyez dans la maison. Remarque La distance entre votre télécommande (utilisez de préférence toujours des piles alcalines neuves) et le récepteur Control Anywhere peut être de 10 à 25 mètres, en fonction des circonstances sur place.
Page 20
Control Anywhere améliorera la portée et le fonctionnement. Ne posez jamais le Control Anywhere sur votre équipement. Cela pourrait avoir une forte influence sur la portée. Remarque Le Control Anywhere n’est pas compatible avec les équipements B&O. MARMITEK...
3. Caractéristiques techniques Dimensions : 85 x 85 x 95 mm Tension d’alimentation : 230V / 50 Hz Fréquence : 433,92 MHz Portée : 10-20 mètres à travers murs et plafonds CONTROL ANYWHERE...
Page 22
Marmitek aanvaardt geen productaansprakelijkheid bij onjuist gebruik van het product of door gebruik anders dan waarvoor het product is bestemd. Marmitek aanvaardt geen aansprakelijkheid voor volgschade anders dan de wettelijke productaansprakelijkheid. • Sluit de Control Anywhere pas op het lichtnet aan nadat u hebt gecontroleerd of de netspanning overeenkomt met de waarde die op de typeplaatjes is aangegeven.
Page 23
Control Anywhere maakt het voor u mogelijk om al uw audio en video apparatuur met Marmitek afstandsbedieningen (waaronder ook de Easycontrol 8 (artikelnummer 09662) of Easytouch 35 (artikelnummer 09664) of PC Control (09645)) te bedienen waar dan ook in huis.
Page 24
Radiofrequent (RF) zender. Met de Infrarood (IR) technologie bedient u uw TV, Video, etc. De X-10 Radiofrequente (RF) technologie maakt het mogelijk verlichting en apparaten op afstand te bedienen, waar dan ook in huis. Er zijn talloze toepassingen denkbaar wanneer u de Marmitek X- 10 technologie in huis gebruikt.
Page 25
• Met één druk op de knop alles uitschakelen wanneer u naar bed gaat Om uw verlichting en apparaten te kunnen besturen heeft u naast deze Home Control TM 13 module ook een afstandsbediening nodig: Marmitek Easycontrol 8 (artikelnummer 09662) of Marmitek Easytouch 35 (artikelnummer 09664).
Page 26
3. Schuif de telescoop-antenne in zijn geheel uit. 4. Gebruik uw Marmitek afstandsbediening om uw apparatuur te bedienen, waar u ook in huis bent. Opmerking De afstand tussen uw afstandsbediening (gebruik bij voorkeur altijd nieuwe alkalinebatterijen) en Control Anywhere ontvanger kan 10 tot 25 meter bedragen, afhankelijk van de omstandigheden ter plaatse.
Page 27
buurt van de apparatuur blijft om te controleren of de afstandsbediening werkt en de andere persoon bedient de afstandsbediening. Indien de videorecorder of satellietontvanger niet rea- geert, kan het zijn dat de zendertjes niet op de juiste plaats zijn aangebracht. Bij sommige apparaten komt de plaatsing van de zendertjes erg nauw.
Marmitek B.V. Any use of the Content, including without limitation, distribution, reproducti- on, modification, display or transmission without the prior written consent of Marmitek is strictly prohibited. All copyright and other proprietary notices shall be retained on all reproductions.
Need help?
Do you have a question about the EasyControl 8 and is the answer not in the manual?
Questions and answers