Chapter Ten: Communications; Monitoring Station Reporting - Marmitek PROGUARD 800 Installation Manual

Chapter Ten: Communications

This section explains how to determine the way the control panel communicates via the
GSM and PSTN modules.

10.1: Monitoring station Reporting

The control panel supports three customer accounts for monitoring station reporting.
Each account has its own telephone number and communications options. An
explanation of each of these options is included in this section.
10.1.1: Telephone Number
To edit an account's telephone number:
1. From the Programming menu, select Communications, Accounts [951].
2. Select a CS account (1-3).
3. From the account's sub-menu, select Phone Number [#1].
4. Enter up to 16 digits. Use the
(switch to DTMF tone dialling), "P" (switch to pulse dialling) or "+"
(international code). Use the
Press 3 when you have finished editing.
5.
10.1.2: Account Number
To edit an account number:
1. From the Programming menu, select Communications, Accounts [951].
2. Select a CS account (1-3).
3. From the account's sub-menu, select Account Number [#2].
4. Enter up to eight digits. Enter leading zeros for account numbers of
less than eight digits. Use the
1
If the programmed protocol is Contact ID, "A" is not a valid entry in the account number.
Press 3 when you have finished editing.
5.
10.1.3: Protocol
To program an account's communication protocol:
1. From the Programming menu, select Communications, Accounts [951].
2. Select a CS account (1-3).
3. From the account's sub-menu, select Protocol [#3].
4. Select a protocol from the options available.
1
Account number 3 is designed for use with the Follow me feature. It is the only telephone
number that can be programmed by the user.
10.1.4: Communication Interface
For each account, you can choose whether the system employs cellular or PSTN
communication.
To program an account's communication interface:
1. From the Programming menu, select Communications, Accounts [951].
2. Select a CS account (1-3).
3. From the account's sub-menu, select Interface [#4].
4. Select either GSM or PSTN.
-66-
key to enter "*", "#", "," (pause), "T"
key to delete one character at a time.
key to enter hexadecimal digits.
© MARMITEK