730-W Dc Specifications; Table 16. Edge Finger Pin-Out - Intel SC5300BRP Technical Product Specification

Intel® Server Chassis SC5300 5U Kit TPS
3.2.4.3 AC Line Fuse
The power supply shall have a single line fuse, on the line (hot) wire of the AC input. The input
fuse shall be a slow blow type. AC inrush current shall not cause the AC line fuse to blow under
any conditions. No protection circuits in the power supply shall cause the AC fuse to blow
unless a component in the power supply has failed. This includes DC output load short
conditions.
3.2.5

730-W DC Specifications

3.2.5.1 Output Module Edge Connector
The power supply provides card edge fingers, which mate to a female connector located on the
backplane (power distribution board). This blind mating type connector connects the power
supply's output voltages and signals.
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
Revision 1.31

Table 16. Edge Finger Pin-out

Pin Component
side
GND
GND
GND
GND
GND
GND
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
GND
GND
GND
Pin Bottom
31 GND
30 GND
29 GND
28 GND
27 GND
26 GND
25 +12V
24 +12V
23 +12V
22 +12V
21 +12V
20 +12V
19 +12V
18 +12V
17 +12V
16 +12V
15 +12V
14 +12V
13 GND
12 GND
11 GND
Chassis Power Subsystem
35