©
Intel
LB440GX 2U Rack Server Chassis TPS Rev 1.0
1 Introduction
This specification details the feature set of the Intel
factor server chassis designed for the Intel
Intel LB440GX features include:
2U rack mount chassis (3.46" H x 16.75" W x 28" L)
One floppy drive
Two 32-bit/33 MHz PCI slots on the included PCI Riser Card
Four hot-swap hard drive bays capable of supporting two 1" and two 1.6" LVD SCSI hard drives
Two system fans
One 300-Watt PFC PS/2* power supply
2 Chassis
The chassis is 3.46 inches high, 16.75 inches wide, and 28 inches long. The rear I/O panel conforms
to the ATX Specification version 2.03, supporting two expansion cards.
2.1
Chassis Color
The primary exterior chassis color will match Intel Color Standard 513505 (dusty beige).
2.2
Front Panel Features
The front panel is pressed SECC with four removable SCSI drive bays, two 1.6" and two 1". The front
panel also allows for a floppy drive and full-size CD-ROM. The front panel contains a power button
power indicator LED, and hard drive activity LED's.
2.3
Security
At the chassis level, no security option is provided (no chassis intrusion).
2.4
I/O panel
All input/output connectors are accessible on the rear of the chassis and an ATX 2.03-compatible
cutout is provided for I/O shield installation. A metal I/O shield with appropriate Electromagnetic
Interference (EMI) gasket is installed in the cutout in order to maintain EMI-compliance levels. The
I/O cutout dimensions (measured in inches) are shown in Figure 1 below.
R 0.039 MAX, TYP
1.750 ± 0.008
(0.150)
®
®
L440GX+ server board.
0.100 Min keepout around opening
I/O Aperture
6.250 ± 0.008
Figure 1.
ATX 2.03 I/O Aperture
1
LB440GX 2U rack server chassis, an ATX-form
Baseboard
Datum 0,0
5.196 ± 0.010
(0.650)