Ipmb Cable For 6-Drive Bays (4-Pin); I 2 C Cable For 6-Drive Bays (3-Pin); Figure 37. I C 4-Pin Cable; Figure 38. I C 6-Pin Cable - Intel SC5300BRP Technical Product Specification

Front Panel
6.3.7

IPMB cable for 6-Drive Bays (4-pin)

A 4-pin cable connects the server board to the HSBP to communicate server management
information, such as drive and fan status to the server board. Note that the server management
features will vary by server board. This cable plugs into the IPMB 4-pin connector on the server
board. The 4-pin cable ships with the upgrade kit. Note that the 3-pin cable described below
2
6.3.8 I C Cable for 6-Drive Bays (3-pin)
The 3-pin cable connects a RAID controller to the HSBP to communicate server management
information, such as drive status to the server board. This cable is required if the RAID
controller is to drive the SATA HDD LED activity lights via the SAFT-E commands. This 3-pin
cable ships with the upgrade kit and usually connects to the RAID controller card.
84
also ships with the upgrade kit.
Figure 37. I
C37205-001
P1
XXXX WW YY
Figure 38. I
Intel® Server Chassis SC5300 5U Kit TPS
2
C 4-pin Cable
P2
2
C 6-Pin Cable
Revision 1.31