Configuring The Gsmamr-Nb Codec For The High-Density Packet Vfc; Overview And Restrictions For The Gsmamr-Nb Codec - Cisco VGD-1T3 Software Configuration Manual

Voice gateway
Table of Contents

Advertisement

Configuring and Managing the High-Density Packet Voice Feature Card
Command or Action
Step 5
exit
Example:
Router(config-voicedsp)# exit
Step 6
end
Example:
Router(config)# end
Configuring the GSMAMR-NB Codec for the High-Density
Packet VFC
This section provides information about the following:

Overview and Restrictions for the GSMAMR-NB Codec

The Adaptive Multirate Narrow Band (AMR-NB) codec is a high complexity multimode codec that
supports eight narrowband speech encoding modes with bit rates between 4.75 and 12.2 kbps. The
sampling frequency used in AMR-NB is 8000 Hz and the speech encoding is performed on 20 ms speech
frames. Therefore, each encoded AMR-NB speech frame represents 160 samples of the original speech.
The AMR-NB codec was originally developed and standardized by the European Telecommunications
Standards Institute (ETSI) for Groupe Speciale Mobile (GSM) cellular systems. and chosen by the Third
Generation Partnership Project (3GPP) as the mandatory codec for third generation (3G) cellular
systems.
You must buy a license to access the DSPware that supports the AMR-NB codec. It is recommended that
Note
you purchase a Cisco SMARTnet contract in order to streamline the process of getting the AMR-NB
codec DSPware. When obtaining your license, use the following part numbers:
For more information, contact your Cisco representative or visit the following Cisco.com website to
obtain a Cisco SMARTnet contract:
http://www.cisco.com/en/US/partner/products/svcs/ps3034/ps2827/ps2978/serv_datasheet09186a0080
092491.html.
Table 1
Overview and Restrictions for the GSMAMR-NB Codec, page 75
GSMAMR-NB Codec Compliance with RFC 3267, page 76
Configuring the GSMAMR-NB Codec on the High-Density Packet VFC, page 77
FRVGD-AMR-LIC for the Cisco VGD 1T3
FRVGD-AMR-LIC for the Cisco VGD 1T3
contains codec mode and bit rate information for the AMR codec.

Configuring the GSMAMR-NB Codec for the High-Density Packet VFC

Purpose
Exits config-voicedsp configuration mode and returns to
global configuration mode.
Exits global configuration mode and returns to privileged
EXEC mode.
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
75

Advertisement

Table of Contents
loading

Table of Contents