Digi AnywhereUSB Plus User Manual page 5

Revi
sion Date Description
AC Augu
st
2024
Release of DigiAnywhereUSB Plus firmware version 24.6.
AB July
2024
Additional changes
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2025 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document " as is," without warranty
of any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this
manual or in the product(s) and/or the program(s) described in this manual at any time.
AnywhereUSB Plus User Guide
n Added documentation for the
Linux.
System time synchronization:
n
You can now configure how often you want your AnywhereUSB Plus to
synchronize its system time. Configure the duration of the synchronization
(default is set to 1 day), as well as continue to have it synchronize at start-up
and when there is a change in the default route. See
synchronization for more information.
New Device managed public key setting for WireGuard VPN:
n
For server mode, enable the AnywhereUSB Plus to generate a public and
private key pair for a peer. See
n New metrics views for the Watchdog service:
View metrics in the local web UI or use the new CLI command. See test
failures in Digi Remote Manager. See
n Isolate clients setting:
Now enabled by default in the Network > SD-WAN > Wi-Fi > Access Points
configuration. This prevents all clients attached via Wi-Fi from
communicating with other clients on the same access point.
Enable event log uploads setting:
n
This setting (Monitoring > Device event logs) is now enabled by default.
Uploading event logs to Digi Remote Manager now occurs automatically.
New feature: Block a client ID from connecting to groups
n
AnywhereUSB Manager install process for
System time
Configure the WireGuard
Watchdog service.
VPN.
5