Digi AnywhereUSB Plus User Manual page 906

Virtual Private Networks (VPN)
f. Repeat for each additional test.
AnywhereUSB Plus User Guide
Set the interface to test.
l
i. Use the ?to determine available interfaces:
(config vpn openvpn client openvpn_client1 surelink tests
1)> other_interface ?
Test interface: Test the status of this other interface.
Format:
/network/interface/setupip
/network/interface/setuplinklocalip
/network/interface/eth1
/network/interface/eth2
/network/interface/loopback
Current value:
(config vpn openvpn client openvpn_client1 surelink tests
1)> other_interface
ii. Set the interface. For example:
(config vpn openvpn client openvpn_client1 surelink tests
1)> other_interface /network/interface/eth1
(config vpn openvpn client openvpn_client1 surelink tests
1)>
Set the type of IP connection:
l
(config vpn openvpn client openvpn_client1 surelink tests 1)>
other_ip_version value
(config vpn openvpn client openvpn_client1 surelink tests 1)>
where value is one of:
o any: Either the IPv4 or IPv6 connection must be up.
o both: Both the IPv4 or IPv6 connection must be up.
o ipv4 The IPv4 connection must be up.
o ipv6: The IPv6 connection must be up.
The status required for the test to past.
l
(config vpn openvpn client openvpn_client1 surelink tests 1)>
other_status value
(config vpn openvpn client openvpn_client1 surelink tests 1)>
where value is one of:
up: The test will pass only if the referenced interface is up and passing its
o
own SureLink tests (if applicable).
o down: The test will pass only if the referenced interface is down or failing its
own SureLink tests (if applicable).
OpenVPN
906