Digi AnywhereUSB Plus User Manual page 214

Interfaces
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. For your single-cellular AnywhereUSB Plus, click Network > Interfaces > Modem > modem >
APN Selection.
4. For APN Selection, select whether you want your AnywhereUSB Plus to use the preconfigured
APNs, custom APNs, or both.
a. If you selected either the Custom APN list only or the Both custom list and builtin list, click
 to add an APN.
b. (Optional) For APN, add a name.
c. (Optional) For IP version, select one of the following settings:
n
n
n
AnywhereUSB Plus User Guide
Automatic: Requests both IPv4 and IPv6 address.
IPv4: Requests only an IPv4 address.
IPv6: Requests only an IPv6 address.
The default is Automatic.
Use Digi Remote Manager to view and manage your
Wide Area Networks (WANs)
214