Digi AnywhereUSB Plus User Manual page 908

Virtual Private Networks (VPN)
n
where value is one of:
n
n
AnywhereUSB Plus User Guide
(config vpn openvpn client openvpn_client1 surelink actions 0)>
action value
(config vpn openvpn client openvpn_client1 surelink actions 0)>
WWAN interfaces:
(config vpn openvpn client openvpn_client1 surelink actions 0)>
modem_action value
(config vpn openvpn client openvpn_client1 surelink actions 0)>
update_routing_table: Increases the interface's metric to change the default
gateway.
If update_routing_table is selected, complete the following:
Set the number of failures for this recovery action to perform, before moving
l
to the next recovery action:
(config vpn openvpn client openvpn_client1 surelink actions
0)> test_failures int
(config vpn openvpn client openvpn_client1 surelink actions
0)>
The default is 3.
Set the amount that the interface's metric should be increased. This should be
l
set to a number large enough to change the routing table to use another
default gateway.
(config vpn openvpn client openvpn_client1 surelink actions
0)> metric_adjustment_modem int
(config vpn openvpn client openvpn_client1 surelink actions
0)>
The default is 100.
Set the time to wait before the next test is run. If set to the default value of 0s,
l
the test interval is used.
(config vpn openvpn client openvpn_client1 surelink actions
0)> override_interval int
(config vpn openvpn client openvpn_client1 surelink actions
0)>
restart_interface.
If restart_interface is selected, complete the following:
Set the number of failures for this recovery action to perform, before moving
l
to the next recovery action:
(config vpn openvpn client openvpn_client1 surelink actions
0)> test_failures int
OpenVPN
908