Digi AnywhereUSB Plus User Manual page 10

Power loss and Hub configuration
Exit the AnywhereUSB Manager
Power cycle feature
Cycle the power to a USB device connected to the Hub from the AnywhereUSB Manager
Cycle the power to a port on a Hub from the web UI
Cycle the power to a device when it disconnects from a PC
Disable the power cycle on disconnect feature
Configure and manage the AnywhereUSB Hub in the web user
interface
AnywhereUSB Configuration page
AnywhereUSB Status page
Rename a Hub and the groups in a Hub
Rename the AnywhereUSB Hub
Rename a group
Configure and manage client IDs
Configure a client ID
Manually add a client ID
Remove a client ID
Client ID overview
Automatically register or reject unknown clients
Automatically reject unknown clients
Automatically register unknown clients
Block a client ID from connecting to groups
Block a client ID
Unblock a client ID
Configure the block client ID time limit
View Hub system information
Configure device identity settings
View current connections to the Hub
Manually configure the PC and assign an IP address to a Hub
Create a debug log file with the USB Debug Logging Wizard
Step 1: Prepare the Hub
Step 2: Run the USB Debug Logging Wizard
Step 3: Send log files to Digi Tech Support and reconnect USB devices to your Hub.
Firmware configuration
Review AnywhereUSB Plus default settings
Local WebUI
Digi Remote Manager
Default interface configuration
Other default configuration settings
Change the default password for the admin user
Change the default SSID and pre-shared key for the preconfigured Wi-Fi access point
Configuration methods
Using Digi Remote Manager
Access Digi Remote Manager
Open the web user interface
Open the web UI from the AnywhereUSB Manager
AnywhereUSB Plus User Guide
118
118
120
120
121
122
123
125
127
127
128
128
129
129
130
130
132
133
133
134
134
135
135
136
138
138
138
140
141
141
142
144
144
144
144
145
145
147
149
149
149
150
150
10