Digi AnywhereUSB Plus User Manual page 910

Virtual Private Networks (VPN)
n
n
n
AnywhereUSB Plus User Guide
(config vpn openvpn client openvpn_client1 surelink actions
0)>
modem_power_cycle: This recovery action is available for WWAN interfaces only.
If modem_power_cycle is selected, complete the following:
Set the number of failures for this recovery action to perform, before moving
l
to the next recovery action:
(config vpn openvpn client openvpn_client1 surelink actions
0)> test_failures int
(config vpn openvpn client openvpn_client1 surelink actions
0)>
The default is 3.
Set the time to wait before the next test is run. If set to the default value of 0s,
l
the test interval is used.
(config vpn openvpn client openvpn_client1 surelink actions
0)> override_interval int
(config vpn openvpn client openvpn_client1 surelink actions
0)>
reboot_device.
If reboot_device is selected, complete the following:
Set the number of failures for this recovery action to perform, before moving
l
to the next recovery action:
(config vpn openvpn client openvpn_client1 surelink actions
0)> test_failures int
(config vpn openvpn client openvpn_client1 surelink actions
0)>
The default is 3.
Set the time to wait before the next test is run. If set to the default value of 0s,
l
the test interval is used.
(config vpn openvpn client openvpn_client1 surelink actions
0)> override_interval int
(config vpn openvpn client openvpn_client1 surelink actions
0)>
custom_action: Execute custom recovery commands.
If custom_action is selected, complete the following:
Set the number of failures for this recovery action to perform, before moving
l
to the next recovery action:
(config vpn openvpn client openvpn_client1 surelink actions
0)> test_failures int
OpenVPN
910