Digi AnywhereUSB Plus User Manual page 989

Command line interface
> scp host hostname-or-ip user username remote remote-path local local-path to
local
where:
n hostname-or-ip is the hostname or IP address of the remote host.
n username is the name of the user on the remote host.
n remote-path is the path and filename of the file on the remote host that will be copied to the
AnywhereUSB Plus device.
local-path is the location on the AnywhereUSB Plus device where the copied file will be
n
placed.
Transfer a file from the A nywhereUSBPlusdevice to a remote host
To copy a file from the AnywhereUSB Plus device to a remote host, use the
> scp host hostname-or-ip user username remote remote-path local local-path to
remote
where:
n hostname-or-ip is the hostname or IP address of the remote host.
n username is the name of the user on the remote host.
n remote-path is the location on the remote host where the file will be copied.
n local-path is the path and filename on the AnywhereUSB Plus device.
To copy a support report from the AnywhereUSB Plus device to a remote host at the IP address of
192.168.4.1:
1. Use the system support-report command to generate the report:
> system support-report path /var/log/
Saving support report to /var/log/support-report-0040D0133536-24-01-12-
12:10:00.bin
Support report saved.
>
2. Use the scp command to transfer the report to a remote host:
> scp host 192.168.4.1 user admin remote /home/admin/temp/ local
/var/log/support-report-00:40:D0:13:35:36-24-01-12-12:10:00.bin to remote
admin@192.168.4.1's password: adminpwd
support-report-0040D0133536-24-01-12-12:10:00.bin
>
Display status and statistics using the show command
The AnywhereUSB Plus show command display status and statistics for various features.
For example:
AnywhereUSB Plus User Guide
Display status and statistics using the show command
scp command as follows:
989