Digi AnywhereUSB Plus User Manual page 209

Interfaces
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. For single-cellular models, click Network > Modems > WWAN cellular modem or Modem.
4. Click Network > Modems > Modem.
5. Modem configurations are enabled by default. Click to toggle Enable to off to disable.
6. The Active SIM slot selection is used to determine which SIM slot the modem will attempt to
connect with. For Active SIM slot, select one of the following options:
n Any: Use the SIM slot that was last used or was last operational. The default is Any.
n SIM1: Only use SIM slot 1 with the modem
n SIM2: Only use SIM slot 2 with the modem
7. If you set the Active SIM slot to Any, the Preferred SIM slot option displays. Options for
Preferred SIM slot are:
n None: The modem attempts to connect to the SIM in the SIM slot that was last used or
was last operational. None is the default.
n SIM slot: Select the SIM slot that should be considered the preferred slot for this
modem. If a preferred SIM is configured, the Preferred SIM slot check schedule
displays in the configuration settings. In the event of a SIM failover, or if manual SIM
switching is used to switch SIM slots, the modem attempts to reconnect to the
AnywhereUSB Plus User Guide
Use Digi Remote Manager to view and manage your
Wide Area Networks (WANs)
209