Digi AnywhereUSB Plus User Manual page 511

User authentication
n The amount of time that the user is locked out of the system after the specified number of
unsuccessful login attempts.
n An optional public ssh key, to authenticate the user when using passwordless SSH login.
n Two-factor authentication information for user login over SSH and the serial console:
The verification type for two-factor authentication: Either time-based or counter-based.
l
The security key.
l
Whether to allow passcode reuse (time based verification only).
l
The passcode refresh interval (time based verification only).
l
The valid code window size.
l
The login limit.
l
The login limit period.
l
One-time use eight-digit emergency scratch codes.
l
To configure a local user:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Users.
AnywhereUSB Plus User Guide
Use Digi Remote Manager to view and manage your
Local users
511