Digi AnywhereUSB Plus User Manual page 957

Virtual Private Networks (VPN)
Configure an L2TPv3 tunnel
Your AnywhereUSB Plus device supports Layer 2 Tunneling Protocol Version 3 (L2TPv3) static
unmanaged Ethernet tunnels.
Required configuration items
n A name for the L2TPv3 tunnel.
n Enable the tunnel.
n The remote endpoint IP address.
n The local endpoint IP address.
n The session ID.
n The peer session ID.
Additional configuration items
n Encapsulation type. If UDP is selected:
The ID for the tunnel.
l
The ID of the peer's tunnel.
l
Determine whether to enable UDP checksum.
l
n The session cookie.
n The peer session cookie.
n The Layer2SpecificHeader type.
n The Sequence numbering control.

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
AnywhereUSB Plus User Guide
Use Digi Remote Manager to view and manage your
L2TPv3 Ethernet
957