Support And Interface With Feeders - Xerox Troy PocketPro 100 Operator's Manual

Paper stocks
supported on
bypass transport
DFA support
Operator Guide
Figure 1-11 Printer with inverter feeder/stacker + feeder/stacker +
bypass transport
Figure 1-12 Printer with inverter feeder/stacker + feeder/stacker +
feeder/stacker + bypass transport
The illustrations above show a printer with two feeder/stacker
modules and a bypass transport, and a printer with three feeder/
stacker modules and a bypass transport. With the bypass
transport installed, the printer can support up to three feeder/
stacker modules, including the inverter feeder/stacker.
The bypass transport accepts all paper stocks on which the printer
can print, and it accommodates simplex and duplex printing.
The bypass transport meets the Xerox Document Feeding and
Finishing Architecture (DFA) specifications. The system software
supports DFA. However, in order for the bypass transport to
function correctly, you need to set up finishing personality profiles
to identify your finishing device to the printing system. (The
customer support representative for your finishing device can give
you the information you need to create a personality profile for
your third-party finishing device.)

Support and interface with feeders

For information on marketing partners that provide solutions for
support and interface with feeders, contact your local Xerox sales
representative.
Overview
1- 17