Flashforge Inventor 2S User Manual page 66

7) Select the printer for this print job on left upper position, Click[Print].
Click[Start] to start printing, the selected printer will start printing automatically.
Time remaining for this print job, instant extruder/buildplate temperature or other
printing details are all showed in this webpage, you can also pause or cancel this print
job anytime during printing process.
8) After Inventor 2S printer has added to FlashForge Cloud account and connected
successfully(Inventor 2S printer and your computer should link to Internet by WiFi,
printer and computer do not need to connect the same WiFi signal), Then Inventor 2S
printer's camera can be used to monitor the real-time printing status.
(This function 8 is valid for now or later.)
www.flashforge-usa.com
66