Flashforge Inventor 2S User Manual page 56

Step 2: Choose corresponding printer type and firmware version and click
firmware updating box. After confirming the printer is in free state, the software will
automatically update the firmware.
Step 3：Reboot you Inventor 2S and wait for 4-5 seconds, then you can see the update
process bar. When the update finishes, it will go back to the main interface.
Step 4：Tap [Tools]--[About]
③ On Board Preferences
When the computer and printer are in connection, click
Preferences], you can check the printer name.
④ Machine information
When the computer and printer are in connection state, click
information], you can check the machine type, machine name and firmware etc.
www.flashforge-usa.com
6-22
to check whether the updated version is right.
56
[OK] in the
[Tools]--[On Board
[Tools]--[Machine