7-11
7.2.3 Print from USB Stick
①Insert your USB stick with target .g or .gx file to your Inventor 2S.
②Turn on the Inventor 2S. Make sure the build plate has been leveled and the
filament is loaded.
[Print]
and then tap the
USB
icon in the middle. The file(s) will be displayed
③Tap
on the screen. Select the file you want to print and tap [Print]. The file will be
transferred to the printer.
⑥ And the printer will heat up the nozzle automatically and start to print after the
nozzle reaches the aimed temperature.,
Abort: To stop heating and printing. Once you tap
[Abort],
the process is irreversible.
Pause: To suspend the print job, you can tap it again to resume it. You can use this
function when you want to change the filament halfway.
www.flashforge-usa.com
63
Need help?
Do you have a question about the Inventor 2S and is the answer not in the manual?