Flashforge Inventor 2S User Manual page 50

Select the object and duplicate the object through the following two methods:
Method 1: Click [Edit]--[Duplicate]
Method 2: Press the shortcut
⑥ Delete
Select the object and delete the object through the following two methods:
Method 1: Click [Edit]--[Delete]
Method 2: Press the shortcut
⑦ Auto Layout All
[Edit]--[Auto Layout All]
Click
models will be placed automatically as automatic placement rule.
⑧ Repair Models
[Edit]--[Repair Models]
Click
⑨ Supports
Click [Edit]--[Supports]
www.flashforge-usa.com
Ctrl+D
Delete
after loading one or more than one models, all
to repair models.
to enter supports setting interface..
50