Flashforge Inventor 2S User Manual page 11

2.1.2 Terms
The surface on which the Inventor 2S builds an object.
Inventor 2S has an extracting magnet build plate, which is
composed of 3 parts: build tape, flexible metal sheet and
Build Plate
magnetic patch. It is convenient for users to take down the
model, and can be used directly as operating platform for
processing model result.
The blue tape that covers Inventor 2S build plate so
Build Tape
that the object can stick to the build plate well.
The three dimensional amount of space that an object
will use once it is completed. The largest build volume
Build Volume
of Inventor 2S is 150×140×140mm.
Knobs under the build platform that are used for
Leveling Knobs adjusting the distance between the nozzle and build
plate.
The device that draws the filament from the spool,
melts it and pushes it through a nozzle into the build
Extruder
plate.
Also called "print head", which located at the bottom
Nozzle
of the extruder where heated filament is squeezed out.
To cool the outer assembly of the extruder and gear
Cooling Fan
motor.
Filament Intake An opening located at the top of the extruder.
A black plastic piece that guides the filament from the
Filament Guide Tube
filament box to the filament intake.
Filament Cartridge A specific box for placing FlashForge filament.
A solid adhesive used for making the model stick to the
Solid Glue Stick
build plate firmly.
A tool that used for cleaning and unclogging the
Unclogging Pin Tool
extruder.
Stamping Wrench A tool that used for seizing the nozzle's metal cube.
www.flashforge-usa.com
11