Flashforge Inventor 2S User Manual page 40

Method 3: Hold down the
● Rotate
Click the [View] icon
methods:
Method 1. Hold down the right mouse button and drag.
Method 2. Hold down the
● Scale
Rotate the mouse wheel to enlarge or shrink the build plate.
②Set View
Allow users to view the object on the build plate. There are six views are under the
view menu, that is, home view, bottom view, top view, front view, back view, left view
and right view.
Method 1: Click the the
Method 2: Click the the
will appear with six views for selecting.
③Reset View
Allow users to reset views by the following two methods:
Method 1: Click the [View]
Method 2: Click the [View]
viewing options, you can click [Reset].
④Show Model Outline
Click [View]--[Show Model
www.flashforge-usa.com
Shift key, hold down the right mouse button and drag.
and then you can rotate the object by the following two
Shift key, hold down the left mouse button and drag.
[View] button, there are six views in the drop- down list
[Look]
icon on the left, click it again and a submenu
menu and select [Home View]
button on the left, click it again and you will see the
Outline], it will highlight the yellow border of the object
40