Flashforge Inventor 2S User Manual page 48

needs to be saved or not. Click [Yes] will save the modification, while click [No] will
abandon it. If click [Cancel] or close tool tip, then will cancel the new project.
6-13
②Saving
After finishing the model edit and adjustment, there are two ways below to save all
models in the scene.
Method 1:
Click [File]--[Save Project] in the menu bar to save the file as a project file with the
".fpp" suffix, all models in the scene (include support) are independent. After
reloading the files, extruder configuration information and model position will be the
same as the configuration during saving.
Method 2:
Click on [File]--[Save as...] to save the model as project file .fpp or .stl and .obj.
For .stl and .boj, models are integrated as one (include support part). If load it again,
only the position of the model is saved, not include the printing parameters.
③ Preferences
Click [File]--[Preferences], you can choose language and if needs detecting update
when start
6-14
● Language: The software supports six languages, namely, Chinese (simplified
Chinese and traditional Chinese), English, French, Korean, Japanese and Russian.
www.flashforge-usa.com
48