Flashforge Inventor 2S User Manual page 5

Safety Notice
! Notices: Read all the instructions in the manual and familiarize yourself with
the FlashForge Inventor 2S User Guide before setting-up and using. Failure to
comply with the warning and instructions may result in individual injury, fire,
equipment damage or property damage.
PLEASE STRICTLY FOLLOW ALL THE SAFETY WARNINGS AND
NOTICE BELOW ALL THE TIME.
 Work Environment Safety
① Keep your work place tidy.
② Do not operate Inventor 2S in the presence of flammable liquids, gases or dust.
③ Keep Inventor 2S out of children and untrained people's reach.
 Electrical Safety
① Always use the Inventor 2S with a properly grounded outlet. Do not refit Inventor
2S plug.
② Do not use Inventor 2S in damp or wet locations. Do not expose Inventor 2S to
burning sun.
③ In case of device damage, please use the power supply provided by FlashForge.
④ Avoid using the device during an thunderstorm.
⑤ In case of uncertain accident, please unplug the device if you do not use it for long.
 Personal Safety
① Do not touch the nozzle and build plate during printing.
② Do not touch the nozzle after finishing printing.
www.flashforge-usa.com
Notice
5