KEB C6 COMPACT 3 Instructions For Use Manual page 13

2 General Safety Instructions
NOTICE
2.1 Installation
DANGER
NOTICE
ma_ca_c6-compact3-inst-20372037_en
The products are developed and built according to the state of the art and recog-
nized safety rules. Nevertheless, their use may create dangers to life and limb of
the user or third parties or damage to the machine and other material property.
The following safety instructions have been created by the manufacturer for the
area of electric drive technology. They can be supplemented by local, country- or
application-specific safety instructions. This list is not exhaustive. Non-observance
of the safety instructions by the customer, user or other third party leads to the loss
of all resulting claims against the manufacturer.
Hazards and risks through ignorance!
a) Read the instructions for use.
b) Observe the safety and warning instructions.
c) Ask if something is unclear.
Electrical voltage in the vicinity of the device!
Danger to life due to electric shock !
ü This device is intended for installation in control cabinets or machines that can
be operated under dangerous voltages. For any work on the device
a) Switch off the supply voltage of the control cabinet or machine.
b) Secure it against switching on.
c) Wait until all drives has been stopped in order that no regenerative energy can
be generated.
d) Never bridge upstream protective devices. Also not for test purposes.
Use of suitable voltage sources!
Electric Shock!
a) Only voltage sources with safe safe extra-low voltage in accordance with
60364-4-41 may be used.
b) Ensure that the used voltage supplies have the appropriate overvoltage cat-
egory for the application.
c) The requirements listed for
complied with.
d) With existing or newly-wired circuits the person installing the device or machine
must ensure that the PELV
e) Connections with higher voltages must be excluded.
General Safety Instructions | 2
SELV and PELV circuits in
requirements are met.
HD
HD 60364-4-41 must be
13