KEB C6 COMPACT 3 Instructions For Use Manual page 11

1.5 Copyright
1.6 Open Source Information
ma_ca_c6-compact3-inst-20372037_en
The customer may use the instructions for use as well as further documents or
parts from it for internal purposes. Copyrights are with KEB Automation KG and re-
main valid in its entirety.
This KEB product or parts thereof may contain foreign software, incl. free and/or
open source software. If applicable, the license terms of this software are con-
tained in the instructions for use. The instructions for use are already available, can
be downloaded from the KEB website or can be requested from the respective
KEB contact person.
Other wordmarks and/or logos are trademarks (™) or registered trademarks (®) of
their respective owners.
ü Only applies to devices with Linux operating system.
ü This product contains software components.
a) We are obliged to point out that the following disclaimer applies to the GPL and
LGPL components with regard to the rights holders:
This program is published in the hope that it will be useful, but without any guar-
antee; even without the implied warranty of marketability or usability for a spe-
cific purpose. Further information can be found in the GNU General Public Li-
cence and the GNU Lesser General Public Licence.
For other open source components, the disclaimers of the rights holders in the re-
spective licence texts apply.
The software components contained in this product that are licensed by the rights
holder as free software or open source software under a GNU General Public Li-
cence version or a GNU Lesser General Public Licence version or under another
open source licence gives you the right to obtain the source code for the binary file.
The copyright and the corresponding licence information can be found in the /usr/
share/common-licenses folder on the device. The folder is shared and can be ac-
cessed from any other PC via the network.
You can obtain the source code for these software components from us on a data
carrier (CD, DVD or USB stick) at cost price by sending a request with the order
number 00C6DD0-CS01 to the following address within three years of delivery of
the product by us:
KEB Automation KG
Legal Department
Südstrasse 38
32683 Barntrup
Germany
Please provide the following information:
Device name, software version information, serial number of the device, delivery
date.
Then we will send you an invoice. After receipt of payment you will receive the data
carrier with the source code.
Introduction | 1
11