Configuring The Wireless Network - Kyocera ECOSYS MA2600cwx Operation Manual

Hide thumbs Also See for ECOSYS MA2600cwx:
Table of Contents

Advertisement

Installing and Setting up the Machine > Default Settings of the Machine

Configuring the Wireless Network

When the connection settings are configured through a Wi-Fi module-installed model, it is possible to print or
send in a wireless network (wireless LAN) environment.
The configuration methods are as follows:
Configuration Method
Configuring the Connection from
the Operation Panel on This
Machine
Setting the Connection by Using
the Wi-Fi Setup Tool
Configuring Connections on the
Web Page
NOTE
To switch to the network interface other than Wired (default), select the preferred setting on [Primary
Network (Client)].
➡  
Others (page 488)
 
Wired Connection with LAN Cable Using Wi-Fi Setup Tool
To send the Wi-Fi settings configured in the Wi-Fi Setup Tool to the machine, connect the computer or mobile
device with the machine locally. To use a wired LAN cable directly connected to the machine, the Auto-IP
(Link-local) address will be assigned to the machine and the computer. This machine applies Auto-IP as the
default settings.
NOTE
Configure the settings on the operation panel if your computer supports WPS.
➡  
Wi-Fi Settings (page 464)
 
1
Connect the machine with a computer.
1
Connect the machine with a computer via LAN cable when the machine is powered on.
2
Turn on the computer.
IP addresses (link local addresses) of the machine and computer are generated automatically.
Use Quick Setup Wizard when configuring the network in a wizard-style
screen, without setting individually in System menu.
➡  
Configuring Settings Quick Setup Wizard (page 98)
Use Wi-Fi Settings to configure the network details from System menu.
➡  
Wi-Fi Settings (page 464)
This is a tool that can be downloaded from Download Center
kyocera.info/). You can configure the connection according to the
instructions provided by the wizard.
➡  
Wired Connection with LAN Cable Using Wi-Fi Setup Tool (page 80)
The connection can be set using Command Center RX.
➡  Command Center RX User Guide
80
Description
(https://

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECOSYS MA2600cwx and is the answer not in the manual?

This manual is also suitable for:

Ecosys ma2600cfxEcosys ma2600cwfx

Table of Contents

Save PDF